Tridon - Ignition

Ignition Modules

Tools
  • The Ignition Module is an integral part of the vehicle ignition system. The ignition module provides switching of the ignition coil at the correct time and for the correct duration; this is achieved through a signal from a pickup coil, Hall Effect or optical sensor or the ECU.
  • The ignition module also limits current to the ignition coil to prevent overheating and loss of performance caused by excessive temperature.
  • The ignition module must be compatible with the vehicle ignition system; the Tridon ignition module range has been carefully researched and engineered to suit each specific application.
  • Please refer to the Tridon Part Finder for the correct ignition module for your application.
Part No.NameFeatures
TIM001Ignition Module
  • 9 terminal
  • Used with hall pickup and ECU feedback control
  • Heat sink compound must be used.
TIM-GR20Heat Transfer Compound
  • Thermal compound grease, used to protect and insulate electrical connections, while providing excellent thermal and electrical conductivity.
  • Pack of 20 sachet's
TIM002Ignition Module
  • 6 terminal
  • Used with inductive pickup
TIM004Ignition Module
  • 3 terminal
  • Ignition module and pickup combined
  • Heat sink compound must be used
  • Interchanges part - E12-61
TIM006Ignition Module
  • 6 terminal
  • Used with hall pickup
  • Heat sink compound must be used
TIM007Ignition Module
  • 6 terminal
  • Used with inductive pickup and twin ignition coils
  • Heat sink compound must be used
  • Interchanges part - J304
TIM008Ignition Module
  • 2 terminal
  • Ignition module and hall trigger combined
  • Heat sink compound must be used
  • Interchanges part - J152
TIM009Ignition Module
  • 4 terminal
  • Used with inductive pickup
  • Heat sink compound must be used
TIM010Ignition Module
  • 4 terminal
  • Used with inductive pickup
  • Heat sink compound must be used
  • Interchanges part - J117
TIM011Ignition Module
  • 4 terminal
  • Used with inductive pickup
  • Heat sink compound must be used
TIM012Ignition Module
  • 8 terminal
  • Used with inductive pickup and ECU feedback control
  • Heat sink compound must be used
TIM013Ignition Module
  • 5 terminal
  • Used with inductive pickup
TIM015Ignition Module
  • 4 terminal
  • Used with inductive pickup
  • Heat sink compound must be used
TIM016Ignition Module
  • 4 terminal
  • Used with inductive pickup
  • Heat sink compound must be used
TIM017Ignition Module
  • 7 terminal
  • Used with inductive pickup
  • Heat sink compound must be used
TIM018Ignition Module
  • 7 terminal
  • Used with hall pickup
  • Heat sink compound must be used
TIM019Ignition Module
  • 4 terminal
  • Used with inductive pickup
  • Heat sink compound must be used
  • Interchanges part - J106
TIM020Ignition Module
  • 4 terminal
  • Used with inductive pickup
  • Heat sink compound must be used
  • Interchanges part - MC-5357
TIM021Ignition Module
  • 5 terminal
  • Used with inductive pickup
  • Interchanges part - MC-5157, MC-5357 & MC5787
TIM022Ignition Module
  • 5 terminal
  • Used with inductive pickup
TIM023Ignition Module
  • 6 terminal
  • Used with inductive pickup
TIM024Ignition Module
  • 5 terminal
  • Used with inductive pickup
TIM025Ignition Module
  • 5 terminal
  • Used with inductive pickup
TIM026Ignition Module
  • 7 terminal
  • Used with hall pickup
TIM027Ignition Module
  • 6 terminal
  • Used with inductive pickup
  • This ignition module is r.p.m. limited
TIM029Ignition Module
  • 6 terminal
  • Used with inductive pickup
TIM030Ignition Module
  • 5 terminal
  • Used with hall pickup
TIM032Ignition Module
  • 4 terminal
  • Controlled by E.C.U.
  • Heat sink compound must be used
TIM034Ignition Module
  • 4 terminal
  • Used with inductive pickup
  • Heat sink compound must be used
  • Interchanges part - J120 & J170
TIM035Ignition Module
  • 5 terminal
  • Used with inductive pickup and knock sensor feedback
  • Heat sink compound must be used
  • Interchanges part - J208, J207
TIM036Ignition Module
  • 3 terminal
  • Controlled by E.C.U.
  • Heat sink compound must be used
  • Interchanges part - J121
TIM037Ignition Module
  • 3 terminal
  • Controlled by E.C.U.
  • Heat sink compound must be used
  • Interchanges part - J701
TIM038Ignition Module
  • 2 terminal
  • Controlled by E.C.U.
TIM039Ignition Module
  • 4 terminal
  • Used with inductive pickup
  • Heat sink compound must be used
  • Interchanges part - J153
TIM040Ignition Module
  • 3 terminal
  • Controlled by E.C.U.
  • Heat sink compound must be used
TIM041Ignition Module
  • 4 terminal
  • Ignition module and pickup combined
  • Twin ignition and feedback control
  • Heat sink compound must be used
TIM042Ignition Module
  • 6 terminal
  • Controlled by E.C.U.
TIM043Ignition Module
  • 4 terminal
  • Controlled by E.C.U.
TIM044Ignition Module
  • 5 terminal
  • Used with inductive pickup
  • Heat sink compound must be used
TIM045Ignition Module
  • 4 terminal
  • Used with inductive pickup
TIM046Ignition Module
  • 4 terminal
  • Used with inductive pickup
TIM047Ignition Module
  • 9 terminal
  • Used with hall pickup and E.C.U. feedback control
  • Heat sink compound must be used
TIM048Ignition Module
  • 6 terminal (coil).
  • 14 terminal harness socket
  • Distributor-less ignition control module
  • Used with single coil pack (TIC032)
TIM049Ignition Module
  • 6 terminal (coil)
  • 14 terminal harness socket
  • Distributor less ignition control module
  • Used with 3 separate coils (TIC002)
TIM050Ignition Module
  • 4 terminal
  • Controlled by E.C.U.
  • Heat sink compound must be used
TIM051Ignition Module
  • 4 terminal
  • Used with inductive pickup
TIM053Ignition Module
  • 5 terminal
  • Used with inductive pickup and E.C.U.
  • Feedback control
TIM054Ignition Module
  • 5 terminal
  • Used with inductive pickup and E.C.U.
  • Feedback control.
TIM055Ignition Module
  • 5 terminal
  • Used with inductive pickup and E.C.U.
  • Feedback control
TIM059Ignition Module
  • 5 terminal
  • Controlled by E.C.U.
TIM060Ignition Module
  • 4 terminal
  • Used with inductive pickup
TIM061Ignition Module
  • 12 terminal
  • Controlled by E.C.U.
TIM062Ignition Module
  • 7 terminal
  • Controlled by E.C.U.
  • Interchanges part - J722T
TIM063Ignition Module
  • 5 terminal
  • Controlled by E.C.U.
  • Heat sink compound must be used
TIM065Ignition Module
  • 4 terminal
  • Ignition module & pick up combined
  • Heat sink compound must be used
  • Interchanges part - E12-117
TIM067Ignition Module
  • 6 terminal
  • Controlled by E.C.U.
TIM068Ignition Module
  • 8 terminal
  • Controlled by E.C.U.
  • Heat sink compound must be used
  • Interchanges part - J702T
TIM069Ignition Module
  • 9 terminal
  • Controlled by E.C.U.
  • Heat sink compound must be used
  • Interchanges part - J723T
TIM070Ignition Module
  • 6 terminal
  • Used with inductive pickup
TIM071Ignition Module
  • 5 terminal
  • Used with inductive pickup
  • Heat sink compound must be used
TIM072Ignition Module (Genuine Quality)
  • 2 terminal
TIM073Ignition Module
  • 5 terminal
  • Controlled by E.C.U.
TIM074Ignition Module
  • 9 terminal
  • Controlled by E.C.U.
TIM075Ignition Module
  • 6 terminal
  • Controlled by E.C.U.
TIM076Ignition Module
  • 4 terminal
  • Built in inductive pickup.
  • Heat sink compound must be used.
TIM077Ignition Module
  • 6 terminal
  • Controlled by E.C.U.
TIM078Ignition Module
  • 11 terminal
  • Used with inductive pickup
  • Distributor less ignition control module
  • Use with separate 3 coils (TIC002)
TIM079Ignition Module
  • 5 terminal
  • Controlled by E.C.U.
TIM080Ignition Module
  • 6 terminal
  • Controlled by E.C.U.
TIM081Ignition Module
  • 4 terminal
  • Used with inductive pickup
TIM082Ignition Module
  • 5 terminal
  • Controlled by E.C.U.
  • Heat sink compound must be used
  • Interchanges part - J118
TIM083Ignition Module
  • 5 terminal
  • Used with inductive pickup and E.C.U.
  • Feedback control
TIM084Ignition Module
  • 4 terminal
  • Controlled by E.C.U.
  • Heat sink compound must be used
  • Interchanges part - E12-303
TIM085Ignition Module (Genuine Quality)
  • 9 terminal
  • Controlled by E.C.U.
  • Heat sink compound must be used
TIM086Ignition Module (Genuine Quality)
  • 4 terminal
  • Used with inductive pickup
  • Heat sink compound must be used
TIM087Ignition Module
  • 7 terminal
  • Controlled by E.C.U.
  • Heat sink compound must be used
TIM088Ignition Module
  • 6 terminal
  • Controlled by E.C.U.
  • Hall Effect Trigger Module
  • Interchanges part - J882
TIM089Ignition Module
  • 6 terminal
  • Controlled by E.C.U.
  • Hall Effect Trigger Module
  • Interchanges part - J881
TIM090Ignition Module (Genuine Quality)
  • 4 terminal
  • Controlled by E.C.U.
  • Heat sink compound must be used
  • Interchanges part - E12-127
TIM091Ignition Module
  • 4 terminal
  • Controlled by E.C.U.
  • Module without heat sink plate attached
  • Heat sink compound must be used
  • Interchanges part - E12-303
TIM092Ignition Module (Genuine Quality)
  • 3 terminal
  • Heat sink compound must be used
  • Interchanges part - E12-308
TIM094Ignition Module (Genuine Quality)
  • 4 terminal
  • Controlled by E.C.U.
  • Interchanges part - MC-8541
TIM095Ignition Module (Genuine Quality)
  • 4 terminal
  • Controlled by E.C.U.
  • Interchanges part - E12-303
TIM096Ignition Module (Genuine Quality)
  • 4 terminal
  • Controlled by E.C.U.
  • Heat sink compound must be used
  • Interchanges part - E12-310
TIM097Ignition Module (Genuine Quality)
  • 14 terminal
  • Controlled by E.C.U.
  • Module with heat sink plate
  • Interchanges part - MC-8430
TIM099Ignition Module (Genuine Quality)
  • 4 terminal
  • Used with inductive pickup
  • Heat sink compound must be used
  • Interchanges part - E12-117A
TIM100Ignition Module
  • 7 terminal
  • Controlled by E.C.U.
  • Heat sink compound must be used
TIM101Ignition Module
  • 6 terminal
  • Controlled by E.C.U.
  • Hall Effect Trigger Module
  • Interchanges part - J885
TIM102Ignition Module (Genuine Quality)
  • 9 terminal
  • Controlled by E.C.U.
  • Heat sink compound must be used
  • Interchanges part - J723T & J9T05071
TIM103Ignition Module (Genuine Quality)
  • 8 terminal
  • Used with inductive pickup
  • Heat sink compound must be used
TIM104Ignition Module (Genuine Quality)
  • 9 terminal
  • Controlled by E.C.U.
  • Interchanges part - J723T
TIM105Ignition Module (Genuine Quality)
  • 9 terminal
  • Controlled by E.C.U.
  • Interchanges part - J723T
TIM106Ignition Module (Genuine Quality)
  • 3 terminal
  • Used with inductive pickup
TIM107Ignition Module
  • 13 terminal
  • Controlled by E.C.U.
  • Heat sink compound must be used
  • Interchanges part - J716
TIM108Ignition Module (Genuine Quality)
  • 13 terminal.
  • Controlled by E.C.U.
  • Interchanges part - J716
TIM110Ignition Module
  • 6 terminal
  • Used with inductive pickup and E.C.U.
  • Feedback control
TIM111Ignition Module (Genuine Quality)
  • 5 terminal
  • Controlled by E.C.U.
TIM113Ignition Module
  • 5 terminal
  • Used with inductive pickup and E.C.U.
  • Feedback control.
TIM114Ignition Module (Genuine Quality)
  • 5 terminal
  • Used with inductive pickup and E.C.U.
  • Feedback control.
TIM115Ignition Module (Genuine Quality)
  • 5 terminal
  • Controlled by E.C.U.
TIM116Ignition Module (Genuine Quality)
  • 5 terminal
  • Controlled by E.C.U.
TIM118Ignition Module (Genuine Quality)
  • 6 terminal
  • Used with inductive pickup and E.C.U.
  • Feedback control
TIM119Ignition Module (Genuine Quality)
  • 4 terminal
  • Used with inductive pickup
TIM120Ignition Module (Genuine Quality)
  • 5 terminal
  • Controlled by E.C.U.
TIM121Ignition Module (Genuine Quality)
  • 9 terminal
  • Used with inductive pickup and E.C.U.
  • Feedback control
TIM123Ignition Module (Genuine Quality)
  • 9 terminal
  • Used with inductive pickup and E.C.U.
  • Feedback control
TIM127Ignition Module (Genuine Quality)
  • 5 terminal
  • Used with inductive pickup and E.C.U.
  • Feedback control
TIM128Ignition Module (Genuine Quality)
  • 6 terminal
  • Used with inductive pickup and E.C.U.
  • Feedback control
TIM131Ignition Module (Genuine Quality)
  • 9 terminal
  • Controlled by E.C.U.
  • Interchanges part - J714
TIM134Ignition Module (Genuine Quality)
  • 9 terminal
  • Controlled by E.C.U.
  • Heat sink compound must be used
TIM135Ignition Module (Genuine Quality)
  • 2 terminal
  • Module and inductive pickup combined
  • Use screws and replacement instructions provided
TIM136Ignition Module (Genuine Quality)
  • 3 terminal
  • Used with inductive pickup
TIM137Ignition Module
  • 7 terminal
  • Hall Effect sensor